Home Energy Management WAC Lighting Introduces Hawk LED Luminaires

WAC Lighting Introduces Hawk LED Luminaires

1494
0
SHARE

PORT WASHINGTON, N.Y.—From its Endurance series, WAC Lighting introduces Hawk LED Luminaires. These exterior fixtures can be mounted in any direction for direct and indirect illumination for hospitality applications.

Energy Star and DLC rated, Hawk adheres with industry norms of an outdoor fixture with an IP66 wet location listing. WAC Lighting went one step further and created a patent pending design, with a factory-sealed housing that encloses the LED light engine. This ensures that regardless of the orientation the fixtures are mounted there will be no water or dust leaks into the fixture over time.

Included with the luminaire comes a box sleeve. This sleeve is used when mounting the Hawk fixtures to an existing surface mounted junction box, ensuring a clean architectural look. The Hawk also features a built-in level for easy adjustment during installation. The luminaire is motion and photo sensor ready which can be easily installed through knockouts on the fixture.

Hawk is available in 3000K and 5000K color temperatures as well as 19 and 27 watt models, all operating on a universal voltage (120V to 277V) and delivering up to 2095 lumens. The luminaires can be dimmed with either an electronic low voltage or a 0 to 10V dimmer. Offered in Architectural Bronze, Graphite and White finishes, there is an available option for all applications.

Go to WAC Lighting.

LEAVE A REPLY